Stainless Steel Doors: Specifications

MATERIAL:

Door Frames and Leaves are made from Stainless Steel

DOOR LEAVES:

These are constructed from 1.0mm thick stainless steel sheet, formed to provide a 45mm thick fully flush, double skin door shell with seamless welding joint all around. Internal reinforcements ensure rigidity. The doors incorporate honeycomb infill with reinforcement all around.

DOOR FRAMES:

The door frames are produced from 1.2mm stainless steel sheet formed to single rebate profile of size 100mm x 57mm (+/- 0.3mm) with a maximum bending radius of 1.2mm.

The doorframes can be fixed to the brick or block walls using Anchors not welded to the frame (First fix).

VISION GLASS:

Rectangular plain Forted Glass with 5mm thick clear glassg in 450 x 750mm size is provided.

FINISH:

SS 2B finish.

DOOR FITTINGS

HINGES :

Stainless Steel Ball Bearing Butt Hinges of 3mm thickness are fixed flush to the frame and shutter.

LOCK:

Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, Mortise Latch and Panic Devices etc can be provided as required.

FLUSH BOLTS (DOUBLE DOOR):

Concealed extended lever action flush bolts are provided on the top of the door to the leading stile edge.

DOOR CLOSERS:

Doors can be fitted with a large variety of Door Closures.

OPTIONS:

Exit, Electro Magnetic Hold Open Device, Door Coordinator, Enviromental Seals for Air Tightness, Automatic Door Bottoms etc., can be provided if required.